2
When you get a call, the
answering machine
answers it. If the caller
leaves a message, the
answering machine stores
the message.
If your machine hears a
fax tone on the line, it
starts to receive a fax.
Receiving in ANS/FAX Mode
If you have set your machine to
ANS/FAX and your answering
machine is switched off, or the
answering machine is not connected to
your fax machine, the fax machine will
automatically go into receive mode
after several rings.
If you are in TEL mode (manual
reception) when the answering machine
is connected to your fax machine, you
must switch off the answering machine,
or the outgoing message from the
answering machine will interrupt your
phone conversation.
To use this mode, you have to
attach an answering machine to your
fax machine (see page 2.5).
To adjust ringer volume, see page
2.28.
1
Press RCV.MODE until
both FAX and TEL/FAX
lamps are off.
2
When the telephone
rings, pick up the handset
and answer it.
3
If you hear a fax tone, or
if the person on the other
end asks you to receive a
document, press START.
