090
Starting the Multi Slide Show
( )
You can select image to view
1. Use the Up / Down button to select the
[Images] menu and press the Right button.
2. Select a desired sub menu by pressing
the Up / Down button.
[All] : All images saved in the
Memory are played back.
Press the OK button and the settings are saved.
[Date] : Images taken in a specified date are played back.
Press the OK button and the settings are saved.
[Select] :
Play only the selected images. If you press the
Up /
Down
button, you can select the desired images to play
back. The selected image can be saved as [Select1],
[Select2] and [Select3]. If you save the selected image
with the [New Select] command, it will be saved as
[Select1]. But when a new image is saved again using
[New Select], the former image which had been saved
as [Select1] will be saved as [Select2] automatically.
You can change and cancel the images which were
saved as [Select1], [Select2] and [Select3].
Press the
Fn button and the settings are saved.
3. Select [Play] or [Repeat] in the [Start] menu to start the multi
slide show.
Selecting Images Setting play interval
Set the Multi Slide Show play interval.
1. Select the [Interval] sub menu by
pressing the Up / Down button and
press the Right button.
2. Use the Up / Down button to select
the desired interval.
3. Press the OK button to save the
configuration.
The loading time depends on the image size and quality.
While the Multi Slide Show is playing, only the first frame
of a Movie file is displayed.
While the Multi Slide Show is playing, the voice recording file
will not display.
The interval menu functions in the [Off] menu only.
Back Set
Images :All
Interval :1 sec
Music :Off
Effect :Off
Start
All
Date
Select
Back Set
Images :All
Interval :1 sec
Music :Off
Effect :Off
Start
1 sec
3 sec
5
sec
10 sec
