Connecting the 8300 DVR to an External SATA Hard Disk Drive
(optional), continued
% Space Used
100
50
0
Internal
Hard Drive
External
SATA Drive
Golf
1:00 pm EST,
Saturday
T11467
% Space Used
100
50
0
Internal
Hard Drive
External
SATA Drive
T11468
College Football
3:30 pm EST,
Saturday
Disconnecting the External SATA Hard Disk Drive
Complete the following steps to disconnect the SATA drive safely.
1. Make sure that the 8300 DVR is powered off.
2. Disconnect the power cord from the 8300 DVR and wait for at least 10
seconds.
3. Disconnect the power cord and data cable from the external SATA drive.
If you improperly disconnect your SATA drive, you will receive an error
message, and you will be required to restart the 8300 DVR upon reconnecting.
How the SATA Drive Works with Your 8300 DVR
Recordings are balanced between the internal hard drive on the 8300 DVR and
the external SATA drive as follows:
• A recording is not split between an internal and external hard drive.
• The 8300 DVR automatically stores complete programs using the following
space available logic:
- If the external SATA drive has more space available, the SATA drive
stores the next recording.
- If the internal hard drive on the 8300 DVR has more space available, the
internal hard drive stores the next recording.
17
Note: The following graphic illustrates operation logic only; it does not represent
an actual on-screen display.
