A SERVICE OF

logo

Open as PDF
next previous
Desiccant Pack (Sillica Gel)
A substantial difference between the external (water) and the internal
(camera and air) temperatures sometimes result in dewfall on the inside
surface of the housing lens. This phenomenon typically happens when
the camera becomes hot due to long and consecutive use.
To mitigate the effect of the dew, use the desiccant pack (included in the
product package) as follows;
Make sure that the edge of the desiccant pack is not covering the O-ring contact
surface.
Make sure thet the desiccant pack is not trapped when closing the rear cover.
Using the desiccant pack (Sillica Gel)
Install the 1200HD camera to the housing
Place a desiccant pack (Sillica Gel) at the location as shown,
then close the rear cover
1
2
Operation
E-12