A SERVICE OF

logo

Open as PDF
next previous
Savvio 15K SAS Product Manual, Rev. B
25
6.2.1 Conducted noise immunity
Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz.
Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power
connector.
6.2.2 Power sequencing
The drive does not require power sequencing. The drive protects against inadvertent writing during power-up
and down.
6.2.3 Current profiles
Typical +12V and +5V current profiles are shown below .
Note: All times and currents are typical. See Tables 2 and 3 for maximum current requirements.
Figure 1. Typical ST973451SS current profile
+5V = 250 mV pp from 0 to 100 kHz to 20 MHz.
+12V = 800 mV pp from 100 0Hz to 8 KHz.
450 mV pp from 8 KHz to 20 KHz.
250 mV pp from 20 KHz to 5 MHz.