
Configuring the conference system
18 | ADN CU1
“Floor/Loudspeakers” menu
“Floor/Loudspeakers Volume” Adjusts the floor channel volume (“Floor/Loudspeakers”)
“00” ... “32”
“Floor/Loudspeakers Equalizer” Adjusts the tone color of the floor channel
“−12 dB” ... “+12 dB”
“Feedback Suppression” menu
“Loudspeaker” Changes the volume adjustment of the conference units’
built-in loudspeakers in order to increase the max.
possible volume while the risk of feedback due to the
increased volume is reduced.
“Off”
low (approx. +2 to +3 dB)
“Low Intensity”
high (approx. +5 to +6 dB)
“High Intensity”
“XLR Out” Changes the volume adjustment of the OUT audio output
in order to increase the max. possible volume while the
risk of feedback due to the increased volume is reduced.
“Conference Recording” menu
“Record” Starts/stops the audio recording of the conference
channels on a USB mass storage device
“On”/“Off”
“Recording status” Provides information on the status of the audio recording
and on the available memory space on the USB mass
storage device
“System Menu”
“Units” Displays the type and number of the conference units
connected to the connections PORT of the ADN CU1
central unit or ADN PS power supplies
“Topology” Displays the type of topology connected to the ADN PS
power supplies (simple cabling or redundant ring
topology )
“Diagnostics” Calls up the “Diagnostics” submenu –
“Versions” Calls up the “Versions” submenu –
“Diagnostics” menu
“System Load” Provides information on the current supply (A), voltage
supply (V) and power (P)
“Temperature” Provides information on the temperature status
“Bus Statistics” Provides information on the status of data transmission/
errors
Display Function of the menu item Option/display
Floor/Loudspeaker Volume
No
16
16
Floor/Loudspeaker Equalizer
No
+02 dB
–03 dB
+05 dB
Recording Status
No
Status : Off
Free Space : 123456 MB
Units
No
System : 216 D1 06 C1
CU : 00 D1 04 C1
PS01 : 29 D1 01 C1
Topology
No
PS01.I.1 :
PS01.I.2 : – –
PS01.II :
System Load
No
CU.I : – – A V
PS07.II.1 : A – – V
PS07 : P
Temperature
No
CU :
PS07 :
PS11 :
Bus Statistics
No
Error Indication : ☺
Break Count : 1
KA_ADN-CU1_546415_0911_SP13.book Seite 18 Donnerstag, 1. September 2011 11:00 11