Adjusting settings via the operating menu
25
Selecting mono or stereo operation – “Mode”
̈ Select “Stereo” if you want to transmit the audio signals from the left and right audio
input (
BAL AF IN L (I)
ƺ and
BAL AF IN R (II)
ƻ).
̈ Select “Mono” if you only want to transmit the audio signal from the left audio input
BAL AF IN L (I)
ƺ.
Starting synchronization – “Easy Setup”
̈ Call up “Easy Setup” to transfer an unused frequency preset from the EK 300 IEM G3
receiver to the transmitter via the infra-red interface (see page 16).
The RF signal of the transmitter is automatically deactivated (“RF Mute” flashes) and the
transmitter awaits the data transfer.
If you do not want to start the transfer or to chancel the transfer:
Sensitivity
Mode
Easy Setup
Frequency Preset
Name
Equalizer
Auto Lock
Advanced
Exit
Menu
During mono operation, you have to deactivate the pilot tone evaluation on your
EK 300 IEM G3 receiver in order to ensure that the receiver outputs the same signal
on channel I and II.
Mode
Stereo
– 18 dB
Select the desired
setting
Mode
Store the setting
Menu
Stereo
Call up “Mode”
Sensitivity
Mode
Easy Setup
“Stored”
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAK
-10
0
-20
-30
-40
AF
Mono
Sensitivity
Mode
Easy Setup
Frequency Preset
Name
Equalizer
AutoLock
Advanced
Exit
Menu
̈ Press the STANDBY button.
For a detailed description of the Easy Setup function, refer to the chapter
“Synchronizing transmitters and receivers via the infra-red interface” on page 16.
Easy Setup
– 18 dB
RF signal is deactivated
Easy Setup
Infra-red transmission
is awaited
Menu
Call up “Easy Setup”
Mode
Easy Setup
Frequency Preset
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
sync
RF Mute
