Connection to a TV
Connections
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
Others Español
Make one of the following connections, depending on the capabilities of your existing equipment.
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• When Progressive Scan mode is selected, no video signal will be output from the VIDEO
OUT or S-VIDEO OUT jack.
If your TV is compatible with Progressive Scan (480p) and you want to
enjoy that high quality picture;
You must select the connection Method 2 above and Progressive Scan mode.To set the
mode, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” will appear on the display of this unit.
If your TV is not compatible with Progressive Scan;
Use this unit in Interlace mode. Make sure that no “P.SCAN” is on the display of this unit.
If not, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” on the display of this unit will disappear.
