5
Product Description
Outer Tube
Grip
Gearcase
Throttle
Trigger
Tank protector
Ignition Switch
Spark Plug
Fuel Tank
Sweeper Belt
Sweeper Drum
Handle
PB270
Sweeper ns
Using the illustration as a guide, famil-
iarize yourself with your machine and
its various components. Understand-
ing your machine helps ensure top per-
formance, long service life and safer
operation.
WARNING!
Do not make unauthorized
modications or alterations to any
of these units or their components.
IMPORTANT!
The terms “left”, “left-hand”, and
“LH”; “right”, “right-hand”, and “RH”;
“front” and “rear” refer to directions as
viewed by the operator during normal
operation.
Specications
Engine Model S270
Engine Type 2-cycle, vertical-cylinder, air-cooled
Dry Weight (less sweepers) 5.2 kg/11.5 lb.
Dry Weight (Including sweepers) 9.8 kg/21.5 lb.
Bore x Stroke 34 x 30 mm/1.34 x 1.18 in.
Displacement 27.2 cc/1.7 cu. in.
Maximum Power Output 1.5 HP (1.1 kW) @ 7500 min
-1
Fuel/Oil Ratio 50:1 with Shindaiwa Premium 2-cycle mixing oil
Fuel Tank Capacity
660 ml/22.3 oz..
Carburetor Type TK, diaphragm-type
Ignition One-piece electronic, transistor controlled
Spark Plug Champion CJ8Y / NGK BPMR7A
Air Cleaner Type Foam element
Starting Method Recoil
Stopping Method Slide switch
Transmission Type Automatic, centrifugal clutch w/worm gear
EPA Emission Compliance Period* Category A
*Specifications are subject to change without notice.
*The EPA emission compliance period referred to on the emission compliance label located
on the engine, indicates the number of operating hours for which the engine has been shown
to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours
(Intermediate) and A = 300 hours (Extended)
