12
■ Please check each item below if you have trouble with your vacuum.
Before checking, ensure that the vacuum is unplugged from the power supply.
TROUBLESHOOTING GUIDE
Problem
• Suction power is weak.
• The vacuum does not work.
• Power cord does not rewind.
• Power cord won't pull out of
the vacuum.
Check Point
• Vacuum bag
• Wand or hose
• Is the hose adapter inserted
into the suction opening of the
vacuum completely?
• When the vacuum bag is full
or blocked or any of the
accessories are blocked, the
over-heating protection for the
motor is activated.
• Power cord
• Power cord
Note
• If vacuum bag is full, replace
it.
• If clogged or blocked, remove
the object.
• Insert it completely.
• Switch off and unplug the
vacuum and check the
vacuum bag and accessories
and remove any blockages.
The vacuum can be switched
on again after approximately
20 minutes.
• Pull the power cord out a little
and press the cord rewind
button again.
• Do not pull it by force. Rewind
it a little by pressing the cord
rewind button and try pulling it
out again.
• Specifications can be changed for improvement without notice.
For assistance please visit www.Simplicityvac.com or call 1-888-9-Simply.
Model
Rating
Amps
Weight
Dimension (L X W X H)
Cord Length
S24
120V/60Hz
9.5A / 12A (with Power Nozzle)
15.5 Pounds
19" x 12.5" x 9.3"
18 feet
SPECIFICATIONS
S24L(-TACONY)-8.26 2004.8.28 9:55 AM 12
