Instructions for the Installer
9
4. WALL FIXING AND ANTI-TIP DEVICE
WARNING
- All ranges can tip
- Injury to persons could result
- Install anti-tip device packed with the range
- See installation instructions
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH OR
SERIOUS BURNS TO CHILDREN OR ADULTS.
WARNING
ELECTRIC SHOCK HAZARD
- Use extreme caution when drilling holes into the wall or floor. There may be
concealed electrical wires located behind the wall or under the floor.
- Identify the electrical circuits that could be affected by the installation of the
Anti-Tip Device, then turn off power to these circuits.
- Failure to follow these instructions may result in electrcal shock or other
personal injury.
CAUTION: PROPERTY DAMAGE
- Contact a qualified installer or contractor to determine the proper method fro drilling holes through the
wall or floor material (such as ceramic tile, hardwood, etc.)
- Failure to follow these instructions may result in damage to wall or floor coverings.
4.1 Tools needed for installation of Anti-Tip Device:
- Ruler or tape mesurer - Flat blade screwdriver
- Philips screwdriver - Gloves
- Pliers - 3/8” Rachet
- Protection eyer glasses - Wrench
4.2 Instruction for wall fixing
1 Fix the screw to the wall and hook the chain (Fig. A);
2 Hook the chain to the hole positioned at the rear of the cooker (Fig. B – Part. A);
3 Once the chain is in position, push the cooker against the wall;
4 The height of the screw hole from floor level must not exceed 315” - 800 mm (Fig. C).
