Signal Meter registers but no
audible alert sounds.
•
SOLO is probably in City mode
where X-band alerts are
purposefully reduced.
SOLUTIONPROBLEM
•
Briefly press the Dim button to
deactivate Dark Mode.
SOLO’s display is not working.
SOLO’s audible alerts are less loud
after the first few alerts.
•
SOLO is in AutoMute Mode. See
page 5 for details.
•
SOLO’s batteries are low.
Replace batteries as described on
page 1.
All Signal Meter lights flash
occasionally and SOLO "bleeps"
twice each time.
SOLO bounces or sags on
windshield.
•
SOLO is not making contact with
the windshield to provide stability.
While holding down SOLO’s
EasyMount button, slide SOLO
further back toward the wind-
shield so that the back top edge
makes firm contact. See page 3
for details.
•
Suction cups may be worn and
need replacing. To order
replacement suction cups, call
1-800-433-3487.
•
You have inadvertently bypassed
the test alert. To re-engage full
test alert, press and hold the Mute
button at the same time you are
turning SOLO on.
SOLO no longer provides the full
test alert when turned on.
T R O U B L E S H O O T I N G
T
ROUBLESHOOTING
17
