33
Viewing still images
Viewing images on a TV screen
, Connect the A/V multi
connecting cable to the multi
connector of the camera and
the audio/video input jacks of
the TV.
If your TV has stereo type input jacks,
connect the audio plug (black) of the A/V
multi connecting cable to the Lch audio
input jack.
When placing the camera, make sure the
LCD screen is facing up.
• Turn off both the camera and the TV before
connecting the camera and the TV with the A/V
multi connecting cable.
, Turn on the TV, and set the TV/
Video switch to “Video.”
• The name and location of this switch may differ
depending on your TV.
, Set the MODE dial to , and
turn on the camera.
Press b/B on the control button to select the
desired image.
• When using the camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 99).
1
Multi connector
A/V multi connecting
cable (supplied)
v mark
2
TV/Video switch
BACK/NEXT
10:30
PM
2003 7 4101-0002
640
3
VOLUME
2/9
101
