12
Specifications
LINE C connector – pin assignment
Mode Computer VIDEO RGB YUV
Pin No.
1RRR-Y
2GGY
3BBB-Y
4 GND GND GND
5NCNCNC
6 GND GND GND
7 GND GND GND
8 GND GND GND
9 GND GND GND
10 NC NC NC
11 GND GND GND
12 NC NC NC
13 H/HV C SYNC External
connection is not
possible.
14 V External connection is not
possible.
15 External connection is not possible.
5
1
6
10
15 11
Input signal format VIDEO:
NTSC3.58, PAL4.43
RGB:
Operating frequency:
fh: 15 kHz — 36 kHz
fv: 45 Hz — 73 Hz
Audio signal level Audio input: –5 dBs, 47 kΩ or more
Headphones output: 16 Ω or more
Speaker output: 0.5 W + 0.5 W
Video signal level Composite:
1 Vp-p ± 2 dB (at 75 Ω)
Y/C: Y 1 Vp-p ± 2 dB (at 75 Ω)
C (Burst)
NTSC 0.286 Vp-p ± 2 dB (at
75 Ω)
PAL 0.3 Vp-p ± 2 dB (at 75 Ω)
Video RGB signal level
R, G, B: 0.7 Vp-p
C Sync: 1.0 Vp-p
YUV signal level R-Y, B-Y: 0.7 Vp-p
Y: 1.0 Vp-p (including Sync 0.3 V)
RGB signal input level
Separate Sync: TTL level, negative,
positive
Composite Sync: TTL level, negative
Sync-on-Green: 0.3 Vp-p, negative
External control VISCA protocol
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 10.4 inches
Image area:
NTSC Approx. 10.1 inches
PAL Approx. 10.3 inches
RGB 640 × 480 dots, 10.4 inches
Effective picture elements: 99.9 %
Picture elements: 640 RGB × 480 dots
Power requirements AC 100 – 240 V, 50 – 60 Hz
Power consumption Max. 28 W
Stand-by Max. 7 W
Dimensions Approx. 305 × 215.3 × 57.4 mm
(w/h/d)
(12
1
/8 × 8
1
/2 × 2
3
/8 in.)
not incl. projecting parts and controls
Mass Approx. 2 kg (4 lb 7 oz)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries for remote
commander (2)
Stand (1)
Screws to secure the stand (2)
Plate (1)
Power cord (1)
Design and specifications are subject to change without
notice.
