© 2011 Sony Corporation
5. Place the tablet device in the cradle.
6. Make sure the charge indicator is lit.
Note
When you hold or unplug the AC adapter, do not touch its terminal area.
Pulling the cable of the AC adapter forcedly when unplugging it from the cradle may break the
AC adapter or cradle. Be sure to hold the foot of the cradle when unplugging.
When using the cradle foot at its lower position, run the AC adapter cord through the cutout of
the cradle foot to prevent the cradle from falling over.
When placing your tablet device in the cradle while the strap attached, make sure the strap
does not get caught between the tablet device and the cradle.
Hint
When you set your tablet device in the cradle while it is running, or when you turn on your tablet
device with it in the cradle, you will be prompted to select which app you want to start next time
you use the cradle. If you check [None] and [Use by default for this action], you can continue
using the app in use, and the app selection screen will not be displayed in the future.
To change the app to start when you set your tablet device in a cradle, tap [ Apps &
Widgets] - [
Settings] - [Cradle].
Removing your tablet device from a cradle
1. Lift your tablet device up in a straight line.
Related Topic
Parts and Controls (Cradle)
Adjusting the Cradle Angle
