Safety and Installation Considerations
This section contains definitions, warnings, and practical information to ensure a safe working environment.
Please take time to read this section before installing or using this unit. Please do not dispose of these instructions.
Disclaimer
This manual has been written with great care and attention to detail, and we have attempted to cover every operational
aspect of the SSL MadiXtreme. However, it is not a contractual document. Solid State Logic and/or the writer(s) of this
manual cannot be held responsible for any loss or damage arising directly or indirectly from any error or omission in this
manual.
Trademarks
All trademarks are the property of their respective owners and are hereby acknowledged.
Website
The URL for the Solid State Logic website is: www.solid-state-logic.com
General Safety
•
Read these instructions.
• Keep these instructions.
• Heed all warnings.
•
Follow all instructions.
• Do not use this apparatus near water.
• Do not expose this apparatus to rain or moisture.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
• There are no user-adjustments, or user-serviceable items,
on this apparatus.
• Adjustments or alterations to this apparatus may affect
the performance such that safety and/or international
compliance standards may no longer be met.
Caution
•
To reduce the risk of electric shock, do not perform any
s
ervicing other than that contained in these Installation
I
nstructions unless you are qualified to do so. Refer all
s
ervicing to qualified service personnel.
Installation Notes
• When installing this apparatus, place the host system
into which it is to be installed on a secure level surface.
• To prevent damage from static electricity when installing
this apparatus, either to the host system or to this
apparatus, always take proper anti-static precautions.
Always use an anti-static wristband. If in doubt, please
refer to qualified service personnel.
• Take care of rough or sharp edges when accessing the
inside of the host system.
• Never install or remove this apparatus whilst the host
system is powered. Always remove the power cord from
the host system prior to accessing this apparatus.
• If in doubt about installing this apparatus, please refer to
qualified service personnel.
Page 2
