A SERVICE OF

logo

Open as PDF
next previous
10 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Installation Guide • May 2007
7. Insert the remaining CMA arm connector into the plastic cutout on the CMA rail
extension, which you installed to the left slide-rail in Step 3. See
FIGURE 1-9.
FIGURE 1-9 Connecting the CMA Arm to Rail Extension Connector
8. Gently press the tab in the direction indicated in FIGURE 1-9 to open the cutout
enough to insert the connector.
Once you pass the connector through the cutout, release the tab to lock the connector
in place.
9. Position the cable hangers in the appropriate mounting holes in the CMA and
snap them into place. See
FIGURE 1-10.
Tab
CMA extension
CMA arm connector
(on left slide-rail)
arm