A SERVICE OF

logo

Open as PDF
next previous
38 Sun Blade X6450 Server Module Installation Guide • September 2008
Dongle Cable Connections
The dongle cable, which is shipped with your chassis, allows you to connect directly
to the front of your server module, as shown in
FIGURE 2-9.
Note – The dongle cable has either three of four connectors. FIGURE 2-9 shows a
dongle with four connectors.
To connect to the system console:
■ Connect a keyboard and mouse to the USB connector.
■ Connect a monitor to the VGA connector.
The dongle cable is designed for occasional service use. For routine operation, use
the ELOM.
FIGURE 2-9 Dongle Cable Connections
1
2
3
4