第 2 章 安裝 Sun XVR-100 繪圖加速器硬體與軟體 11
4. 安裝 Sun XVR-100 軟體。請鍵入下列指令：
在此範例中，將顯示下列內容：
如果之前已安裝相關軟體，則會顯示下列內容：
您可以使用下列指令檢查系統中是否已安裝 Sun XVR-100 繪圖加速器。請鍵入下列
指令：
# ./install
Installing SUNWpfbx.u SUNWpfbcf SUNWpfbw SUNWpfbmn for Solaris 8 ...
Installing required patch 114537-34 ...
*** Installation complete.
To remove this software, use the íremoveí script on this CDROM, or
the following script:
/var/tmp/xvr-100.remove
A log of this installation can be found at:
/var/tmp/xvr-100.install.2005.02.10
To configure a Sun XVR-100 graphics accelerator, use the fbconfig
utility.See the fbconfig(1m) and SUNWpfb_config(1m) manual
pages for more details.
*** IMPORTANT NOTE! ***
This system must be rebooted for the new software to take effect.
Reboot this system as soon as possible using the shutdown command and the
íboot -rí PROM command (see the shutdown(1M) and boot(1M) manual
pages for more details).
The version is the same on the system.Packages not installed.
All required software is already on the system.
# /usr/bin/pkginfo | grep pfb
