16 TASCAM RC-601MKII
PLAYBACK-RELATED FUNCTIONS
Program Playback
The program playback function can be used to play back
a disc in any desired track order. Up to 30 tracks can be
programmed.
Entering the program mode
Select the program mode using the PLAY MODE key.
Press the PLAY MODE key for the required number of times
until “PROGRAM” is displayed in the message display area
of the display window.
In the program mode, the disc is played back according to
the program made by the method described as follows.
Programming
1 Press the MENU key to enter the menu mode.
2 Use the JOG/DATA dial to select menu No. 05
(“PROG”), and either press the Úkey or turn the
SEARCH dial clockwise (towards YES).
The display window changes to the program setup
screen.
3 Use the numeric keys, TRACK key or JOG/DATA dial
to select the desired track, and turn the SEARCH dial
clockwise (towards YES).
The selected track is set as the 1st tune (program No.
01) of the program, and the next tune (program No. 02)
can be set.
4 Repeat step 3 above for the required number of times to
make the desired program.
5 When you have finished making the program, press the
MENU key to exit the menu mode.
Swapping programmed tracks
You can swap programmed tracks by performing the
following procedure while the program setup screen is
displayed.
1 Press the SEARCH dial to select the program No. that
you want to swap.
2 Use the numeric keys, TRACK key or JOG/DATA dial to
select the desired track, and press the Úkey (or turn the
SEARCH dial clockwise).
3 When you have finished swapping the track, press the
MENU key to exit the menu mode.
Adding program tunes
You can add a program tune by performing the following
procedure while the program setup screen is displayed.
1 Press the SEARCH dial, and select the location to add a
tune. For example, to add a new tune between the tunes
currently preset to program Nos. 2 and 3, select program
No. 3.
2 Press the Úkey.
3 Use the numeric keys, TRACK key or JOG/DATA dial to
select the track to add, and press the Úkey (or turn the
SEARCH dial clockwise).
4 When you have finished adding tunes, press the MENU
key to exit the menu mode.
Deleting program tunes
You can delete a program tune by performing the following
procedure while the program setup screen is displayed.
1 Press the SEARCH dial, and select the program number
that is preset with the tune to delete.
2 Press the CLR key.
This deletes the tune, and the program Nos. of the
following tunes are rounded up.
3 When you have finished deleting tunes, press the MENU
key to exit the menu mode.
Clearing a program
Opening the disc tray clears the program.
[NOTE]
• The program settings are not cleared even if the CD
player is turned OFF with a disc loaded.
RC-601MKII_Eng.indd 16 3/24/2005 2:38:18 PM
