28
Operation
GB
Keep-warm function
With the keep-warm function you can use one of the cooking zones to
keep food warm. The respective cooking zone is operated at a low power
level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
2. Press the
Warming key
, the control lamp above the key will blink.
3. Then press the respective
Plus key
or
Minus key
in order to
allocate the function to a specific cooking zone. The display shows the
symbol .
The control lamp above the key will go off.
4. Press the
Minus key
once to de-activate the function (0).
The keep-warm function is available for 120 minutes, after which the hob will
be switched off.
Power boost setting (cooking zones marked
with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 9.
1. Press the
Power key
once in order to activate the power boost set-
ting. The control lamp above the key will blink.
2. Then press the respective
Plus key
or
Minus key
in order to
allocate the function to a specific cooking zone.
The power display will show a P.
The control lamp above the key will go off.
3. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 9.
Note:
In order to prematurely de-activate the power setting, press the
Minus key
.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
Modules (power management)
