GB
16
* The stainless steel should be washed in
soapy water using a soft cloth. If the
metal is yellowish after washing, we
recommend that you use: lemon, vine-
gar, dilute amonia or a cleaning product
that contains dilute amonia.
* When cleaning the appliance with the
burners removed, care should be taken
not to allow liquid or other objects to get
into the injector openings.
* When cleaning, do not use products that
can harm aluminium, such as soda, oil,
etc.
*The ignition unit (ceramic part and elec-
trode) must be periodically cleaned with
care in order to prevent ignition pro-
blems. A check should also be made
that the burner slots are not obstructed.
Note: Whenever you replace a burner,
you should check that all of the parts
are properly in place. A part that is not
in the right place can cause poor com-
bustion and/or overheating.
Whenever the gas taps are removed, you
should change the washer that is between
the taps and the supply pipe. The burners
are working properly when their flame is
stable and a greeny-blue colour. If the tip
of the flame is yellow, the burners need to
be cleaned; if the problem persists, contact
the Technical Service.
In order to guarantee that the gas installa-
tion is properly sealed and that the burners
are working properly, the hob needs to be
inspected by specialised Technical Service
personnel at least once every 4 years.
Note: Any alteration or adjustment nee-
ded by the appliance should be made
by authorised technical personnel.
The electric hotplates are controlled by a
switch with seven positions. To get diffe-
rent levels of power, all you need to do is
to turn the appropriate knob and set it to
the position you want. On the control
panel, areas are marked (A) that show
(with a circle) the control for each hotplate.
The pan should be placed on the hotplate
before ignition.
The power corresponding to each of the
switch’s positions is as follows:
Maintaining
the burners
Operation of models with
electric hotplates
fig. 7
‘Hotplate in operation’ indicator
Control index
