2 Before using any hotplate, touch the
clock sensor (7). All the control dis-
plays (9) are switched off.
3 Use the sensors or (7/4) to input
the time you want.
When the programmed time elapses, a
series of beeps will sound for several
seconds. To switch these beeps off, touch
the sensor (7).
DISCONNECTING THE COUNTDOWN
TIMER
If you wish to stop the countdown timer
before the programmed time has elapsed:
1 Select the countdown timer sensor
(7). The decimal point (11) will come on.
2 Use sensor (4) to reduce the time to
00. The clock is cancelled.
SWITCHING OFF QUICKLY
1 Select the countdown timer sensor
(7). The decimal point (11) will come on.
2 Touch sensors or (7/4) simulta-
neously to disconnect the countdown
timer.
Touch control user instruc-
tions (models ...640 and ...644)
CONTROL PANEL ELEMENTS (see fig.
8)
On/Off button.
Hob selection buttons.
Power and/or residual heat, and lock
activation displays.
Reduce power/time button (reduce).
Increase power/time button
Power button.
Timer/countdown timer selection button
Timer display (timer).
Stop button.
Hob timer light.
Decimal point in the power and timer
displays.
- Shines (on): Chosen induction element
(ready to be used).
- Doesn't shine (off): Induction element
locked (cannot be used).
Countdown timer indicator.
N.B.: * Only visible when in operation.
The sensors marked on the control panel
are used for control purposes.
There is no need to exert pressure on the
GB
20
Models ...640 and ...644
fig. 8
1
2
3
4
5
6
7
11
10
9
8
13
