en en
4
Description of the Control Functions
a) Fridge Set and Vacation
The desired fridge temperature of the appliance
can be adjusted by using fridge set button. To
change the fridge set temperature press the
fridge set button. The first time the button is
pressed the current set temperature is shown
on the display then afterwards, each time the
button is pressed the new fridge set
temperature will be displayed in sequence: 4,
2, 8, 6, 4, …
The fridge set temperature will blink on the
display for 5 seconds only. Then the actual
fridge temperature will be shown.
Vacation: The fridge compartment temperature
can be adjusted around 13°C. When the fridge
compartment is empty, vacation function can
be activated if desired. The use of this function
will save some power.
In order to preserve temperature inside the
fridge compartment, the fridge door should be
kept closed during vacation function.
Otherwise, the door open alarm will be active
within a minute and the interior light of the
fridge compartment will light on.
To activate vacation function, it is enough to
press the fridge set button for about 3 seconds.
Then the vacation icon on the display will light
on.
To deactivate vacation function, it is enough
to press Quick Fridge or Fridge Set buttons.
b) Freezer Set
The desired freezer temperature of the
appliance can be adjusted by using freezer
set button. To change the freezer set
temperature press the freezer set button. The
first time the button is pressed the current set
temperature is shown on the display then
afterwards, each time the button is pressed
the new freezer set temperature will be
displayed in sequence: -18, -20, -22, -24, -18,
…
The freezer set temperature will blink on the
display for 5 seconds only. Then the actual
freezer temperature will be shown.
c) Quick Fridge
This button is designed for fast cooling of the
fridge. Press quick fridge button to start the
function. The quick fridge icon will light on
when the function is activated. Each time the
quick fridge function is activated, “1” blinks
on the display for 5 seconds only. Then the
actual fridge temperature will be shown. Quick
fridge function lasts for maximum 3 hours.
When the quick fridge function is completed,
quick fridge icon will light off automatically
and the previous fridge set temperature will
be recalled.
Quick fridge function terminates automatically
in 3 hours. To deactivate quick fridge function
manually, it is enough to press quick fridge
button once more or fridge set button. Quick-
freeze and quick fridge functions cannot be
active at the same time. Therefore, pressing
quick freeze button also deactivates quick
fridge function.
The electronic control system incorporates a
safety protection so that if the quick fridge
button is pressed more than once in a short
time, then the compressor will not run
immediately.
d) Quick Freeze
This button is designed for fast cooling of the
freezer. Press quick freeze button to start the
function. The quick freeze icon will light on
when the function is activated. Each time the
quick freeze function is activated, “-27” blinks
on the display for 5 seconds only. Then the
actual freezer temperature will be shown.
Quick freeze function lasts for maximum 32
hours. When the quick freeze function is
completed, quick freeze icon will light off
automatically and the previous fridge set
temperature will be recalled.
Quick freeze function terminates automatically
in 32 hours. To deactivate quick-freeze function
manually, it is enough to press quick freeze
button once more or freeze set button. Quick-
freeze and quick fridge functions cannot be
active at the same time. Therefore, pressing
quick fridge button also deactivates quick
freeze function.
If large amounts of fresh food is going to be
