Features
M3902, M3903, M3904 - Features Page 1
The following features may not appear on all sets. Features have been assigned based on user
requirement and the number of keys on each given model.
Auto Dial
To store one frequently called number on a key.
To program: • Press AUTO DIAL key
• Dial number to be programmed
• Press AUTO DIAL key
To use: • Lift handset
• Press AUTO DIAL
Busy/Forward Status Keys
To see the status of another user’s telephone set.
INDICATOR STATUS
None Idle
Steady Busy
Flash Call forward/Busy
Wink Call forward/Idle
Call Forward
Direct your incoming calls to another extension.
To activate: • Press FORWARD KEY
• Dial desired extension number
• Press FORWARD KEY again
NOTE: To forward to the same number as last time, press Forward key twice.
To cancel: • Press FORWARD KEY
Call Pickup
Answer a call to any telephone in your pickup group.
To use:
• Lift handset
• Press CALL PICKUP KEY or dial 113
• You will be connected to the call
Conference
Establish up to a 6 party conference
During active call:
• Press CONFERENCE KEY (caller is placed on hold)
• Dial number or extension of next party
• Announce conference
• Press CONFERENCE KEY again to join parties
• Repeat for additional conferees (maximum of 6)
NOTE: At least one party must remain connected to your telephone system.
