A SERVICE OF

logo

Open as PDF
next previous
12.
To Replace Oven Light
1. Unplug unit and allow oven to cool completely.
2. Remove screw from oven light bracket, holding onto bracket to
prevent glass from falling.
3. Remove bracket and glass.
4. Remove bulb by turning counter-clockwise.
5. Replace with new bulb, turning clockwise.
6. Replace glass and bracket, being sure the two tabs on the bracket
are in the slots provided for them on the oven wall.
7. Replace bracket screw.
NOTE: Use only a 656 or equivalent 6-watt, 120 volt bulb.
Do not operate the oven without the oven lamp glass in place.
FIGURE 5
FIGURE 6
Convection Oven-Baker Use and Care Guide