Video Setup
Brightness: Adjust the overall picture shade and brightness.
Contrast: Provide adjustment for contrast between light and dark areas of the picture
When pressing the up down button, the number displayed will not be in serial order.
Color: Adjust the color gain on the screen.
Please note that the color will not be black and white when turning the number down to 0.
Hue: Adjust the color phase on the screen, (NTSC only)
When pressing the up down button, the number displayed will not be in serial order.
Sharpness: Set the desired sharpening enhancement to the picture
When pressing the up down button, the number displayed will not be in serial order.
Color Temperature: Select color temperature of either 6500°K or 9300°K
Video System: Display video system types in NTSC or PAL (Display Only)
Over Scan: This function allows an user to select monitor display format.
LARGE: the feature permits the displaying picture to be larger than actual displaying area.
SMALL: the feature permits the displaying picture to approximately match the actual displaying area.
Default: Set the monitor to the original factory setting.
Original factory setting( General Setup, Video Setup)
13
Brightness 100
Contrast 100
Color 100
Hue 0
Sharpness 100
Color Temp 9300
Video System NTSC
Over Scan LARGE
Default
Exit OSD
