15
Plug your DVD/VCR's plug into the mains supply. "Auto"
will start to flash in the display. Your DVD/VCR will auto-
matically tune itself in and set the correct
time and date (This may take
approx. 4 minutes).
Plug your DVD/VCR into the mains sup-
ply and it will start to automatically tune
itself in and set the correct date and
time.
Preparation
•
•
Make sure that your DVD/VCR is connected properly to the TV.
Turn on the TV and switch the TV to it’s AV channel.
Tuning the TV stations and setting the time and
date automatically
1
• The DVD/VCR automatically corrects
the clock setting every hour and
automatically adjusts the clock setting
for Daylight Saving Time (see page 16).
• Your DVD/VCR will tune the TV
stations as follows.
CH 1 BBC 1
CH 2 BBC 2
CH 3 ITV
CH 4 Channel 4
CH 5 Channel 5
CH 6 Satellite
CH 7 etc.
• Skipped channels still may be selected
directly through the Number buttons
(0-9).
• To cancel skipping select the skipped
channel using the Number buttons
(0-9), then press CANCEL. The
channel No. does not blink any longer,
and the channel No. now may be
selected again using CHANNEL / .
Notes:
Press POWER to turn OFF the DVD/VCR.
The broadcast stations received will be turn on your unit.
To skip a channel position
Unwanted channels can be
skipped so that they cannot
be called up by pressing
CHANNEL
/ . Select the
channel to be skipped, then
press CANCEL.
This channel’s number will
be flashing. That way you
can cancel further channels
one after the other.
VCR
VCR
CH 29
2
2J50101A [EN] P14-17 27/2/06, 7:33 PM15
