18-8 STRATA CS CLIENT USER GUIDE
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
Your phone rings three times in a demonstration of that ring. Because
the ring pattern derives from a continuous loop, the first one might be
truncated. Listen for the subsequent rings to hear the pattern accurately.
4. Click OK.
Enabling and disabling hands-free answering
For an overview of hands-free answering, see “Using hands-free answering” on
page 4-9. Use the following procedure to enable or disable hands-free answering
from the Client:
1. On the main menu, click Tools > Options. The Options dialog box
opens.
2. Click the Phone tab.
3. Select the Enable hands-free answering check box. Clear the check
box to turn hands-free answering off.
4. Enter the desired time in the Dial tone time-out seconds. This setting
identifies how long a dial tone plays after the end of a call before the
station reverts to silence waiting for the next call. A setting of 0
indicates no dial tone, which means that the station reverts to silence as
soon as a call ends.
5. Click OK.
Enabling and disabling voice-first answering
Note: Voice-first answering will not work when hands-free answering is also
enabled.
For an overview of voice-first answering, see “Using voice-first answering” on
page 4-10. Use the following procedure to enable or disable voice-first answering
from the Client:
1. On the main menu, click Tools > Options. The Options dialog box
opens.
2. Click the Phone tab.
3. Select the Enable voice-first answering check box. Clear the check
box to turn voice-first answering off.
4. Click OK.
