TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
173
TL-SL3428(config)#interface fastEthernet 1/0/2
TL-SL3428(config-if)#spanning-tree mcheck
show spanning-tree active
Description
The show spanning-tree active command is used to display the active
information of spanning-tree.
Syntax
show spanning-tree active
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the active information of spanning-tree:
TL-SL3428(config)#show spanning-tree active
show spanning-tree bridge
Description
The show spanning-tree bridge command is used to display the bridge
parameters.
Syntax
show spanning-tree bridge [ forward-time | hello-time | hold-count | max-age |
max-hops | mode | priority | state ]
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the bridge parameters:
TL-SL3428(config)#show spanning-tree bridge
show spanning-tree interface
Description
The show spanning-tree interface command is used to display the
