A SERVICE OF

logo

TL-WPS510U Pocket-Sized Wireless N Print Server
Basic Settings:
¾ Network Type: To change the WLAN type to Ad-Hoc (default) or Infrastructure.
¾ SSID: To change the SSID to connect an existing wireless network.(default: WLAN-PS)
¾ Channel: Indicates the channel setting for this print server.
¾ Transmission Rate: Select the basic transfer rates based on the speed of wireless network.
¾ Wireless Mode: Select the WLAN mode based on the existing wireless network
Advanced Settings:
¾ Security Type: To change the wireless security settings based on the existing wireless
network. Default setting is Disable.
Site Survey:
The following site survey table will provide a list of existing wireless network. You can choose one
to join in.
4.3.3 TCP/IP Setup
Click TCP/IP, the following screen will appear.
Figure 4-10
¾ Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related
47