TL-WR1043ND Wireless N Gigabit Router
-4-
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the QSS button are located on the front panel (View from left to right).
Name Status Indication
Off Power is off.
Power
On Power is on.
On The Router is initializing or maybe has a system error.
Flashing The Router is working properly.
System
Off The Router has a system error.
Off The Wireless function is disabled.
WLAN
Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but there is no
activity.
WAN,
LAN 1-4
Flashing There is an active device linked to the corresponding port.
Slow Flash
A wireless device is connecting to the network by QSS function.
This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the network by
QSS function.
QSS
Quick Flash
A wireless device failed to be added to the network by QSS
function.
Table 1-1 The LEDs description
