TL-WR641G 108M Wireless Router User Guide
all wireless devices on your network. The default SSID is TP-LINK. This value is
case-sensitive. For example, TP-LINK is NOT the same as TP-Link.
Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the router can be used. It may be illegal to use the
wireless function of the router in a region other than one of those specified in this
filed.
Channel - the current channel in use. This field determines which operating
frequency will be used.
Mode - Indicates the current mode (108Mbps (Dynamic), 108Mbps (Static),
54Mbps (802.11g), 11Mbps (802.11b)). If you select 108Mbps (Dynamic), it is
compatible with 54Mbps (802.11g) and 11Mbps (802.11b). If you select 54Mbps
(802.11g), it is compatible with 11Mbps (802.11b).
These settings are only for basic wireless parameters, for advanced settings, please
refer to
Section 5.5: "Wireless."
Note: The change of wireless settings won't take effect until the router reboots! You can
reboot it manually. If you need instructions as to how to do this, please refer to
Section
5.11.3: "Rebooting the Router"
Click the Next button, you will then see the Finish page:
Figure 4-10 Quick Setup - Finish
After finishing all configurations of basic network parameters, please click Finish button
to exit this Quick Setup.
- 12 -
