TL-WR702N 150Mbps Wireless N Nano Router
- 147 -
Be sure to click the Save button to save your settings on this page.
)
Note:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.
z Near the center of the area in which your wireless stations will operate.
z In an elevated location such as a high shelf.
z Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
z Away from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.
8.7 DHCP
Figure 8-9 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 8-9), DHCP
Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
8.7.1 DHCP Settings
Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the
page as shown in Figure 8-10. The Router is set up by default as a DHCP (Dynamic Host
Configur
ation Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router in the LAN.
