TP-Link TL-WR843ND Manual

A SERVICE OF

next previous

TL-WR843ND 300Mbps Wireless AP/Client Router User Guide

- 13 -

2. After a successful login, you can click the Quick Setup menu to quickly configure your

Router.

Figure 3-5 Quick Setup

3. Click Next, and then Working Mode page will appear. Tick Control the system mode by

software, as shown in Figure 3-6.

Figure 3-6 Working Mode



Note:

1) The Router supports two working modes for multi-user to access the Internet: Standard Wireless

Router and WISP Client Router, you can either select working mode by software as shown above

or select it by turn the work mode switch at the back panel of your router, as shown below.

2) If you are unsure about which one to select, please refer to Working Mode Help page on the

right. You can configure your device quickly by the following steps in different modes.