TP-Link TL-WR941N Manual

A SERVICE OF

next previous

TL-WR941N/TL-WR941ND Wireless N Router

- 18 -

Step 2: Choose Press the button of the new device in two minutes and click Connect..

Step 3: For the configuration of the wireless adapter, please choose Push the button on my

access point in the configuration utility of the QSS as below, and click Next.

The QSS Configuration Screen of Wireless Adapter

II. By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the

network by PIN with the following two methods.

Method One: Enter the PIN into my Router

Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2,

then the following screen will appear.