102
G Specification
Video specification
Resolution: 640 x 480 pixel
Sensor: 1/3” color CMOS sensor
Gain control: Automatic
Exposure: Automatic
White Balance: Automatic
Shutter: Electronics 1/60 ~ 1/15000 sec
Minimum Illumination: 2.5lux@f1.4, 3000K color
Focal Length: 6.0 mm
Aperture: F=1.8
Focus Extent: 20 cm - ∞
Lens mounting: Fixed board lens
Image (Video Setting)
Image compression: JPEG
Frame rate: 20fps@SIF, 6fps@VGA
Compression Rate selection: Auto
Frame rate setting: 1, 5, 7, 15, 20, auto (depends on the
video format)
Video resolution: 320x240, 640x480
Brightness control: Range 1- 128
Contrast control : Range 1- 128
Saturation Control: Yes
Hardware Interface
LAN Connector: One RJ-45 port to connect to
10/100Mbps Ethernet, auto-sensed
Wireless LAN: Built-in 802.11b wireless LAN
module (Wi-Fi compliant)
LED Indicator: Power LED (Green)
Link LED (Yellow)
103
Note:
LED three mode setting can be changed by software. (Normal / Off /
Dummy)
Power Supply: DC 5V, switching type
Power Communication: 6.5 Watt (1300mA x 5V)
Antenna Connector: 1 connectors
Communication Support
Communication: 10/100Mbps Ethernet and 802.11b
wireless LAN.
Encryption: 64 bit, 128 bit or OFF
Communication protocol: HTTP, FTP, TCP/IP, UDP, ARP,
ICMP, BOOTP, RARP, DHCP,
PPPoE
Browser Support
System requirement:
CPU: Pentium II, 266 MHz or above
Memory Size: 32 MB (64 MB recommended)
VGA card resolution: 800x600 or above
• Internet Explorer 5.0 or above
• Netscape 6.0 or above
Note:
ActiveX Mode –View Image supports Internet Explorer under Windows
OS.
IPView SE Application
Support OS: Win 98 SE, Win 2000, Win Me, Win XP
System requirement for IPView:
CPU: Pentium III, 450 MHz or above
Memory Size: 128 MB (256 MB recommended)
