Tripp Lite Series 5kVA Manual

next previous

Mounting (Rack)

4-Post Mounting

Connect the two segments of each shelf

using the included attached screws and

wing nuts

. Leave the screws slightly loose so that the shelves can be adjusted in

thenextstep.

Adjusteachshelftofityourrack,thenmounttheminthelowestavailablespaceof

your rackwith thescrews,nutsand washersprovided

. Note that the support

ledges should face inward. Tighten the wingnuts that connect the shelf segments

Attach mounting ears

tothefrontmountingholesofyourequipment

using

the screws provided

. The ears should face forward.

Using an assistant, lift your equipment and slide it onto the mounting shelves.

Attach your equipment to the rack by passing the screws, nuts and washers

(user-provided)

through its mounting ears and into the rack rails.

To mount your equipment in a 2-post rack, you must purchase aTripp Lite 2-Post

Rackmount Installation Kit (model: 2POSTRMKITWM, sold separately). See the

InstallationKit'sowner'smanualforcompletemountinginstructions.

Mountyourequipmentineithera4-postor2-postrackorrackenclosure.Theusermustdeterminethefitnessofhardwareandprocedures

beforemounting.Ifhardwareandproceduresarenotsuitableforyourapplication,contactthemanufacturerofyourrackorrackenclosure.

The procedures described in this manual are for common rack and rack enclosure types and may not be appropriate for all applications.

WARNING!

Transformer modules are extremely heavy! Use caution while lifting and mounting! User must properly

stabilize the module while lifting and mounting!

2-Post (Telecom) Mounting