USE OF THE CROWN
To adjust the time or set the date, pull the crown out to
the 1st or 2nd position. After adjusting, push the crown
back to its normal position.
(0) position
Hour hand
Chronograph minute
hand
Chronograph second
hand
Date
Button A
Minute hand
24-hour hand
Crown /
normal crown
position
Button B
ADJUSTING THE TIME
Pull the crown out to the 2nd position so that the second
hand stops at the (0) position. Turn the crown to set the hour
and minute hands.
ADJUSTING THE DATE
Pull the crown out to the 1st position. Turn the crown anti-
clockwise to set the date. After the date has been set, push
the crown back to its normal position.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time accurately
to 1/1 of a second, up to a maximum of 59 minutes and 59 seconds.
The chronograph can be started and stopped at any time by pressing
button A. Pressing button B resets the chronograph. All hands will
then return to their (0) position.
If the chronograph second hand does not return to the (0) position
after the chronograph has been reset or after the battery has been
replaced, you should do the following. Pull the crown out to the 2nd
position. Press button A to set the chronograph second hand to the
(0) position. Push button A continuously until the second hand returns
to the (0) position. The chronograph second hand can be advanced
rapidly by continuously pressing button A. Once the hand returns to
the (0) position, push the crown back to its normal position.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
