Installation of Wall Mount (Optional)
To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to
the instructions that come with the base mounting kit. To convert your
ViewPanel from a desk-mounted to a wall-mounted display, do the following:
1
Disconnect Power.
2 Lay the ViewPanel face down on
a towel or blanket.
3
Pull the back plate away from the
head of the ViewPanel. Let the
plate hang on the neck of the
ViewPanel as shown on the left.
Notice the four screws.
4
Remove the four screws from the
back plate.
5 Attach the mounting bracket
from the VESA compatible wall-
mounting kit (100 mm x 100 mm
distance).
6
Attach the ViewPanel to the wall,
following the instructions in the
wall-mounting kit.
Remove
four
screws
ViewSonic VP191/VP191b 6
