ViewSonic 9 3DPF8
Time/Date mode
On the Main Menu, select the TIME/DATE item and press OK to set the date and time for
the system. In addition, you can set up to four alarms for the system.
Setting Description
Time Use the Navigation buttons UP / Down to set the correct
time settings.
Date Select the date format (M/D/Y, Y/M/D, or D/M/Y. M: month,
D: day, Y: year) and then use the Navigation buttons UP /
Down / Left / Right to set the correct date settings.
Alarm Select the alarm item (1~4) and then complete the required
settings:
● ON/OFF - Enable or disable the alarm.
● Time - Use the Navigation buttons UP / Down / Left /
Right to set the alarm time.
● Repeat - Select the repeat time for the alarm.
If there is any inconsistency on time settings, the message “Conict setting” will
appear on the screen.
