A SERVICE OF

logo

Open as PDF
next previous
Troubleshooting
4140
8.3 Other Problems
Problems Solutions
No power
Press and hold the power button for at least three seconds
(Page 12, Section 2.3), if the LED does not light green with
the device booting-up then:
-
Ensure that the power adaptor is plugged-in to a suitable
power socket
-
Ensure that the DC connector is fully inserted into the correct
socket on the rear of the VSD221 located under the cover
(see page 8 and 11)
-
Check the power socket with another device (i.e. table lamp)
-
If there is still no power then contact ViewSonic support or
the Reseller from whom the device was purchased
No display Check external HDMI device and connections.
Lock-up Restart by pressing and holding power button.
App doesn't
function
Check with App author.
No network Check WiFi settings, try Ethernet if available.
No audio Check volume level setting.