MF-105B SPECIFICATIONS
DESCRIPTION:
Analog effects module incorporating two functions: 7 – band
Resonant Filters and 1 - band Shelving (Lowpass) Filter and a 24-
Pattern Sequencer triggering Volume Envelopes for 8 Filters.
FRONT PANEL FEATURES:
DRIVE rotary control - adjusts the gain of the audio input to the
effect.
OUTPUT rotary control - balances the level of Bass MuRF’s
signal when the effect is on with the bypassed signal when the
effect is off.
MIX rotary control - adjusts the ratio of direct to effected signal
when the effect is on.
110 Hz – 1.8K slider controls - sets the gain of each lter.
PATTERN 12-position rotary switch - selects one of 12 animation
patterns.
BANK A, B/LFO slider switch - selects bank of patterns, bank B
patterns include LFO modulation of the lters’ frequencies.
ENVELOPE rotary control - morphs the shape of the patterns’
envelopes.
RATE rotary control - adjusts the rate of the animation patterns
DRIVE, a three-color LED that shows the level of the input signal.
RATE, a LED that indicates the animation pattern rate.
BYPASS, a two-color indicator LED that tells whether the effect is
active or bypassed.
ON/BYPASS, a rugged, smooth-acting ‘stomp switch’.
JACK PANEL FEATURES:
AUDIO IN ” phone jack – accepts any instrument-level or line-
level signal from –16 dBm to +4 dBm. Input impedance is one
megohm.
LEFT/MONO OUT ” phone jack - -4 dBm nominal maximum
output level; +8dBm absolute maximum output level. Output
impedance is 1,000 ohms.
RIGHT OUT ” phone jack – 4 dBm nominal maximum output
