A SERVICE OF

logo

Starting Your Dryer
1
Put the sorted load into
2
Move the POWER
n
the dryer and close
. SWITCH to ON.
the door tightly.
To Stop Dryer:
l
Open the door or
l
Move POWER
SWITCH to OFF
To Check load:
l
Open door.
l
Dryer will remem-
ber setting if you
restart within 2 mm-
utes Touch selector
with blinking light to
restart
To Restart Dryer:
l
Close dryer door
. Touch FABRICTEMP
SELECTOR with the
blinking light.
l
Dryer will remem-
ber CUSTOM DRY or
TIMED DRY settrng
you were using
4
IMPORTANT: If a finished
load is not as dry as you
like:
1. Clear dryer memory by
moving the POWER SWITCH
to OFF and then back to
ON.
2. Touch the FABRIC-TEMP
SELECTOR for the load
type.
3. Touch the 20-minute
TIMED DRY Control.
Remember to select a dif-
ferent dryness setting for
the next similar load.
Other Selections:
FINISH GUARD ” -
Control
. FINISH GUARD IS
automatrc in all
cycles. If o load
is
not removed at the
end of a cycle, the
dryer will tumble the
load in short cycles
to help prevent
wrinkling.
l
If you
do not
want
FINISH GUARD, touch
the FINISH GUARD
Selector [The FINISH
GUARD light will
go out.) See page 7
for details