A SERVICE OF

logo

1. Pull knobs straight off.
2. Use worm soapy water and Q soft cloth, or spray gloss cleaner, to wipe the
control panel. Rinse and wipe dry.
3. Wash control knobs in worm soapy water. Rinse well and dry.
4. Push control knobs straight bock on. Make sure they point to OFF.
Surface Units and Reflector Bowls
t
1
2. Lift the edge of the unit, opposite
the receptacle, just enough to
clear the reflectnr howl.
_-.-. --
continued on next page