-- -
.
The storage clrawer
The storage drawer is for storing pots
and pans. The drawer can be removed
to make it easier to clean under the
range, and to check for installation of
the anti-tip bracket(s). Use care when
handling the drawer.
Removing the storage drawer:
1. Empty drawer of any pots and pans
before removing drawer. Pull drawer
straight out to the stop.
2. Push up black plastic lever on both
sides of drawer.
3. Pull drawer out a little farther until
levers stay in “up” position. Pull
drawer the rest of the way out.
Replacing the storage drawer:
1. Make sure ball bearings on oven
slide rail are positioned toward the
front of the opening.
2. Fit ends of drawer slide rails into the
oven slide rails on both sides of
opening.
3. Slide drawer closed.
Use and care guide storage
Store this booklet, along with your
Cooking Guide and sales slip in the
Literature Pat, inside the storage
drawer.
To verify that the anti-tip bracket(s)
is engaged:
l
Remove storage drawer.
l
Look to see if the anti-tip bracket(s) is
attached to floor with screws.
l
Make sure rear leveling leg(s) is
positioned under bracket(s).
l
See “Important Safety Instructions” on
page 4 and Installation Instructions for
further details.
NOTE:The range will not tip during
normal use. Tipping can occur if
excessive force or weight is applied to
open door without anti-tip bracket(s)
properly secured.
17
