Xerox 4595 Copier/Printer Getting Started
3-7
3. Loading Paper
5. Move both Paper Weight Switches to their appropriate
positions.
6. Push the tray in gently until it comes to a stop.
NOTE: When the loaded tray is closed, the tray position is
automatically adjusted in the front/back direction based on the
paper size.
Loading paper in Tray 8 (Post-Process Inserter)
Use the following procedure for loading paper into the
Post-Process Inserter (Tray 8),
KEY POINT: The Post-Process Inserter (Tray 8) is used when
your desired output includes separators, or covers; therefore, it
cannot have an image copied on to it. Your separator or cover
paper may be blank or with an image already copied onto it.
1. Hold the center of the paper guides and slide to the desired
paper size.
2. Load the separator or cover paper into the tray; ensure that is
aligned to the front of the tray.
