A SERVICE OF

logo

8-22
2. Turn the adjusting nut on brake cable
to provide a gap of 0 ~ 1 mm (0 ~
0.04 in) between the cam shaft lever
and pin.
1. Brake cable adjusting nut a. 0 ~ 1 mm (0 ~ 0.04 in)
3. Turn the adjusting bolt until free play
reaches 5 ~ 7 mm (0.2 ~ 0.3 in) at the
lever pivot.
1. Locknut 2. Adjusting bolt
a. 5 ~ 7 mm (0.2 ~ 0.3 in)
4. Tighten the locknut.