29
Specifications
Digital Section
• Full Digital Signal Processing
• 8 Channel Preamp
• Digital Effects
• Compressor
• Chorus, Flanger, Phaser, Rotary Speaker,
Tremolo
• Digital Delay, Tape Echo
• Spring Reverb, Hall Reverb, Plate Reverb
• Tap Tempo Function (Delay Time)
• Speaker Simulator (16 Types)
• External Controller Function (EXP Pedal/MIDI):8
Controllers/Parameters
• Wah Function
• Tuner Function (Chromatic, Auto)
Analog Section
• 60 W Solid State Power Amp
• 30 cm Speaker (EMINENCE) x 1
MIDI Functions
Receive: Program Change (Program Change Table
can be created), Control Change, Bulk In
Transmit: Program Change, Control Change, Bulk
Out, Merge Out
Controller Switch
Top Panel
Push Switch x17
UP, DOWN, MANUAL, UTILITY, STORE,
COMP, CHORUS, FLANGER, PHASER, RO-
TARY, TREMOLO, DELAY, TAPE ECHO,
SPRING, HALL, PLATE, SP. SIM
Knob x15
AMP SELECT, GAIN, MASTER, TREBLE,
MIDDLE, BASS, PRESENCE, COMP,
SPEED, DEPTH, TIME, FEEDBACK, LEVEL,
REVERB, OUTPUT
Rear Panel
Push Switch x1
POWER
Display
7 Segment LED (3 digit) x1
Push Switch LED x17
Connections/Jacks
INPUT HIGH, LOW: Standard Monaural Phone Jack
LINE OUT L/MONO, R: Standard Monaural Phone Jack
PHONES: Standard Stereo Phone Jack
POWER AMP IN: Standard Monaural Phone Jack
Foot Switch Unit Terminal: 13 pin DIN
DIGITAL OUT: COAXIAL
MIDI IN, MIDI OUT: 5 pin DIN
A/D Converter
20 bit + 3 bit Floating
D/A Converter
20 bit
Sampling Frequency
48 kHz
Memory Allocations
Preset: 90
User: 90
Input Level/Impedance
INPUT HIGH: -25dBm/1MΩ
INPUT LOW: -15dBm/1MΩ
POWER AMP IN: 0dBm/100kΩ
Output Level/Impedance
LINE OUT L/MONO, R: -3dBm/2.3kΩ
PHONES: 0dBm/47Ω (47Ω load)
SPEAKER: 60W RMS/8Ω
Power
U.S. and Canadian models : 120V, 60Hz
General model : 230V, 50Hz
Power Consumption
70 W
Dimensions (WxHxD)
513 x 491 x 291 mm (20.2” x 19.3” x 11.5”)
Weight
17 kg (37 lbs 8 oz)
Accessories
Foot Switch Unit
Foot Switch Special Cable
Owner’s Manual (this booklet)
Patch List
Foot Switch Unit
Footswitch x4 (1, 2, 3, BANK)
LED x6 (1, 2, 3, BANK x3)
Connections/Jacks
EXP. PEDAL: Standard Stereo Phone Jack
Connects main unit and foot switch: 13 pin DIN
Dimensions (WxHxD) : 280 x55 x108 mm
(11.0” x 2.2” x 4.3”)
Weight : 930 g (2 lbs 1 oz)
* Specifications and design may change without
notice.
