22
REMOTE CONTROL UNIT
1 Transmit/Learn Indicator
In LEARN mode, lights to indicate that the key just pressed is
ready for learning input. In USER mode, blinks when a learned
key is pressed to show that a control signal has been sent to your
equipment.
2 YPC/USER/LEARN Switch
Set to YPC for operating this unit and Yamaha Audio/Video units.
Set to USER for using learned key functions. Set to LEARN for
learning new control functions. (See page 38.)
(“YPC” is the abbreviation of YAMAHA Preset Code.)
3 Power Key
Turns the POWER on mode to the STANDBY mode and vice
versa.
4 Input Selector Keys
Select the input source.
5 CD/LD Function Keys
Operate functions on your Yamaha CD player and LD player.
When the 1/2 Switch is set to 1, they operate the CD player, and
when set to 2, they operate the LD player.
6 Blank Keys
Have no preset functions, so are used for learning other remote
controller’s functions only.
7 Test Switch
When pressed, sends a signal to the main left, center, main
right, and rear effect speakers in turn, and when pressed once
again, sends a signal to the main and front effect speakers in
turn for easy comparison of level settings.
